Phased Array Antenna: Advantage, principle and classification
- Introduction
Antesky newly designed front-feed with Linear/Circular Pol. Switchable below.
Circular Pol. Feed to Linear Pol. Feed Switch ( Before leaving the factory, it is circular Pol.)
Switch dis-assembly point of the linear Pol. & circular Pol.
- How to achieve Circular Pol. switch to linear Pol.？
Due to it is circular Pol. before leaving the factory, so when you switch to linear Pol., the angle only needs to be turned from hole No. 1 to hole No. 2 (On the below flange drawing) , and finish duplexer adjusting linear polarization after fixing the screw.
Notes: Please mark with a marker before adjusting.
Below mechanical drawing is the flange drawing as Fig.1 with red mark.
Linear Pol. Switch flange diagram
- Matched antenna
Normally this type of feed is suitable for prime-focus front-feed type antenna, such as 2.4m, 3m, 3.7m, 4.5m, 6m, 7.3m front-feed antenna.
2.4M/3.0M prime-focus receive only antenna
3.7M/4.5M prime-focus receive only antenna
6M prime-focus receive only antenna
7.3M prime-focus receive only antenna
- What is prime-focus front-feed type antenna
Prime-focus parabolic antenna
- Difference photo between front-feed and back-feed
All above are the brief introduction of Antesky LP/CP switchable front-feed. For matached antenna detail, please check at 7.3m TVRO antenna and also you can send your inquiry at sales@antesky.com .
Related posts
