How to Replace1.2m Mobile Auto-acquire Satellite Antenna Controller ?

In our previous article, you can find that Antesky 1.2m mobile auto-acquire satellite antenna, which can be assembled within 5 minutes and no tools required during installation. Please view this installation video for details.

Why this antenna takes less time to assemble? Cause our mobile auto-acquire satellite antenna’s main structure with BUC, LNB are integrated into an whole, which makes the antenna system more simple and convenient. Assembly is simple and no need to align again, as well as rapid pointing.

In 2022, we had shipped 4 sets of 1.2m mobile auto-acquire satellite antennas to European country, where in this case introduction you will check antenna rigid structure and package. Client sent us an email that this 4 sets of mobile auto-acquire satellite antennas had finished assembly and testing, until now everything thing is good and end user likes our solution, he will try to introduce more Antesky antennas to other clients.

Customer feedback of 4 sets of 1.2m mobile auto-acquire satellite antenna

After the product is updated and upgraded, it has higher adaptability and operability. We can provide customized services according to the requirements of customers, and there is no problem with receive only or transmit and receive antenna. In this blog, we will discuss how to help a customer exchange the controller of mobile auto-acquire satellite antenna.

As you can see, our antenna controller is integrated in a chassis. It supports remote control by a rugged hand-held smart phone which support English and Chinese version. Further, this antenna has the high precision and possesses one-button pointing to satellite in one minute, which can deploy, track and adjust automatically.

Side view of mobile auto-acquire satellite antenna

Top view of mobile auto-acquire satellite antenna

Rear view of mobile auto-acquire satellite antenna

There are below 6 steps for controller of mobile auto-acquire satellite antenna replacement instructions.

Step 1: Check and identify the problem

Before beginning any repair work, it is important to check out the problem with the flyaway antenna. In this case, the customer has reported a problem with the controller. This could be due to various reasons, like a malfunctioning controller, loose connections, or a damaged cable.

Step 2: Prepare the necessary tools

To change the controller of mobile auto-acquire satellite antenna, a set of basic tools are required such as a screwdriver, pliers, and wire cutters. You may need a replacement controller and any other necessary components as well including cables or connectors.

Step 3: Disconnect the old controller

To remove the old controller, first, disconnect any cables or connectors that are attached to it. If the controller is screwed in place, remove the screws using a screwdriver. Once the old controller is removed, check the cables and connectors to make sure that they are completed.

Controller of 1.2m mobile auto-acquire satellite antenna

Step 4: Install the new controller

Now, it’s time to install the new controller. Attach any cables or connectors to the new controller and screw it in place using the screws that you removed earlier. Double-check that all connections are secure and tight.

Step 5: Retest the flyaway antenna

It’s time to test the flyaway antenna once the new controller is installed. Power it on and check that the controller is functioning properly. Test all communication modes to ensure that the flyaway antenna is working normally.

Step 6: Offer instructions to the customer

Once you have successfully done the replacement the controller of the mobile auto-acquire satellite antenna, then offer instructions to the customer about how to use the new controller. This may include how to power on the flyaway antenna, how to connect it to a satellite, and how to operate it in different modes.

In a summary, replacing the controller of a mobile auto-acquire satellite antenna can be a relatively simple process if you operate according to these steps. However, it is important to have experience in satellite communication systems and to be familiar with the equipment before attempting any repairs.

If you want to know more details about mobile auto-acquire satellite antenna, please contact via sales@antesky.com or Whatsapp here directly. Thanks!