1. Overview of 0.75m Flyaway Satellite Antenna
CF-FA75K 0.75m flyaway antenna, with the small size and light weight, is one of Antesky newly developed products and it is convenient to carry and quick deploy, which supports multimedia communication services such as voice, data, audio and video, and wide area network access in a limited time. It can meet the requirements of CCIR 580-6, ASIASAT and INTELSAT. It is suitable for temporary or frequently changing installation sites, or in where no regular communication means on the ground including earthquake disaster relief, TV broadcasting, maritime affairs, exploration, meteorology and other emergency communication fields.
This CF-FA75K 0.75m flyaway antenna panel is made of more than 90% of carbon fiber compound material with light weight and high surface accuracy of 0.3 RMS . Antenna backup support structures and turntable pedestal are made of special materials.This compact and simple structure can not only ensure the strength under the heavy wind condition but also can keep the antenna in light weight for carrying. The feed structure is updated to realize quick installation and replacement. In the meantime, our antenna 6 petals panels can be installed repeatedly with high precision. One person can finish installation within 5 minutes and no tools required. The completed antenna system weighs about 8kgs and can be packed in one case or in backpack, which is IATA compliant and cost effective for shipping.
2. Key Features of 0.75m Flyaway Satellite Antenna
- Meet the requirements of CCIR 580-6, ASIASAT and INTELSAT
- Using the latest carbon fiber composite material for light weight;
- Easily and quickly deploy without any tools;
- No tools required during installation and one person can finish within 5 minutes;
- Offset feed design for high gain and excellent side lobe performance;
- One case or backpack packed <8KG;
- Optional aviation package material available.
3. Technical specification of 0.75m Flyaway Satellite Antenna Manufacturer
TECHNICAL SPECIFICATION | ||||
ELECTRICAL SPECIFICATION | ||||
Antenna Aperture | 0.75m | |||
Operation Frequency | Tx | 13.75-14.5 GHz | ||
Rx | 10.95-12.75GHz | |||
Gain | Tx | >38.5 dBi | ||
Rx | >37.2 dBi | |||
Polarization | Linear | |||
Cross-polarization | Tx | >30dB | ||
Rx | >30dB | |||
VSWR | Tx | 1.25︰1 | ||
Rx | 1.25︰1 | |||
3dB beamwidth | Tx | 1.9° | ||
Rx | 2.1° | |||
Power Capacity | 100W | |||
Feed Interface | WR75 | |||
Tx/Rx Isolation | Rx >40dB Tx >85dB | |||
Sidelobe | First sidelobe<-14 dBi | |||
MECHANICAL SPECIFICATION | ||||
Antenna Type | Offset antenna | |||
Main reflector material | Carbon Fiber | |||
Net Weight | 8 Kg | |||
Gross Weight with case | 19Kg | |||
Elevation | 0–90° | |||
Azimuth | ±60°Vernier adjustment | |||
Polarization | ±90° | |||
ENVIRONMENTAL SPECIFICATION | ||||
Operational wind load | 20m/s | |||
Temperature operational | -30℃–50℃ | |||
OPTIONS | ||||
Finishes Color
Green, tan or per customer demand |
Frequency available
Ka-band,Ku band |
Drive mode
Manual or motorized |
4. Assemble guidance of 0.75m Flyaway Satellite Antenna
Find a level ground site (flyaway antenna with no requirements for the foundation). Firstly, check the components according to the provided packing list. If there found no any lost or damage, then take out the components respectively to start assembling per following steps.
- Turntable and three support legs assemble
Put pedestal on the ground and then connect three legs with pedestal and fasten the buckle.
- Reflectors assemble
Assemble the panels according to orders marked on rear of panel.
- Feed network install
Assemble feed bracket and then assemble feed in order.
5. Package & shipping dimension of 0.75m Flyaway Satellite Antenna Manufacturer
- In carbon fiber aviation case
ITEM | DESCRIPTION | QYT(case) | DIM(L×W×H)MM | G.W(KG) | N.W.(KG) |
1 | 0.75m flyaway antenna | 1 | 832*530*294 | 19 | 8 |
Total | 1 | 0.13CBM | 19 | 8 |