13.0M L/C-band Limit Motion Antenna are applied for Telemetry,Tracking&Command/Remote sensing, Deep space missions/Geodesy, Radio astronomy,which is designed and manufactured by Antesky. It supplies continuous stroke, high speed and accelerated velocity, as well as high pointing accuracy/tracking accuracy, the antenna allow all visible operation for GEO Satellite and LEO Satellite.
Servo drive and tracking system can supply each operation modes, all antennas can equip reflector electric heating de-icing system, include integrating infrared heating rods on the antenna reflector. Antenna pedestal support/tower pedestal can be steel structure or reinforced concrete structure. Tower pedestal can be done as a hub equipment room which can supply electronic equipment.
Except the antenna system is supplied by Antesky, all transmitting/receiving electronic products can be customized by the customer; Antesky has a professional project management team to supply design, producing, transportation, installation, debug, and acceptance test, as well as after-sale maintenance and repair service; Antesky is an antenna system who provides turnkey services to the customers.
13M L/C-band Rx Only Limit-motion Antenna Specification
ELECTRICAL SPECIFICATION | ||
Diameter | 13M | |
Operating Frequency, GHz | L-Band | C-Band |
Receive | Receive | |
1.45GHz-1.75GHz | 3.4~4.2 | |
Gain, Mid-band, dBi | ≥42.8+20log(f/1.6) | ≥52+20log(f/3.8) |
Polarization | Circular | Circular |
VSWR | 1.5 | 1.3 |
G/T(at feedhorn) | ≥21dB/K at EL 10° | ≥34dB/K at EL 10° |
AR | ≤1.75dB (on axial) | |
XPOL | ≥30 dB (on axial) | |
Feed | 4-port CP feed(L-Band:LHCP&RHCP, C-Band:LHCP&RHCP) | |
Feed Interface | N-50K | WR229 |
Radiation Pattern | 1st sidelobe not higher than -14dB,CCIR.580-4 | |
Mechanical Specification | ||
Antenna Type | Shaped Cassegrain Antenna | |
Antenna Pedestal Type | El over Az geometry | |
Azimuth | ±100°(180°total in 2 sectors, ball screw jack drive.) | |
Elevation | 0°~90°(Continuous) | |
Driving Chain Mode | Az/El Drive: single-motor drive ,three -phase AC motor ball screw jack drive | |
Antenna velocity (AZ/ EL) | at least 0.08°/s average | |
Step tracking accuracy | ≤1/10 beamwidth | |
Antenna Accessorial Parts and Interface | Hot Dip Galvanise | |
Hempel Paint over Galvanise | ||
Lightning Arresting Rods· | ||
Lightning Arrestor down-conductors | ||
Foundation HW | ||
Access ladder & platform, galvanised, compliant to BS 5395‐3: Part 3: 1985 | ||
Hub Enclosure with door | ||
Environmental Specification | ||
Operational Wind | 72km/h Gusting to 97km/h | |
Survival Wind | 200km/h | |
Temperature | – 45°C ~ + 60°C | |
Relative Humidity | 100% | |
Seismic (Survival) | 0.3g (H), 0.15g (V) |
Specification for 13.0m L/C-Band Antenna