1Meter Motorized Flyaway Antenna

1. Overview of 1Meter Motorized Flyaway Antenna

ATDF-100K 1.0m Motorized flyaway antenna from Antesky is highly compact, light weight, making it convenient to carry and quick deploy. The flyaway antenna system is mainly composed of antenna control unit, antenna drive unit, input and output unit, GPS module, beacon receiver, inclinometer and other components. It provides simple one-button function for end user and can realize satellite aligning within 3 minutes. As the manual flyaway antenna, it can meet the requirements of CCIR 580-6, ASIASAT and INTELSAT as well. It is suitable for for temporary or frequently changing installation sites, or in where no regular communication means on the ground including earthquake disaster relief, TV broadcasting, maritime affairs, exploration, meteorology and other emergency communication fields.

Antenna panel is made of composite carbon fiber material with light weight and high surface accuracy of 0.3 RMS. The prime focus feed is updated with excellent electrical performance of low side lobe and remarkable cross-polarization. This flyaway antenna features 8 petals of carbon fiber panels, which can be assembled repeatedly with high precision. One person can finish installation within 5 minutes with no tools required. The completed antenna system weighs about 27kgs and be packed in three rigid customized cases with IATA compliant and cost effective for shipping.

2. Key Features of 1Meter Motorized Flyaway Antenna

Meet the requirements of CCIR 580-6, ASIASAT and INTELSAT;
Panel using the latest carbon fiber composite material for light weight;
Antenna system equipped with GPS, position detecting system, polarization adjustment system, servo drive system, auto protection system, high performance satellite beacon receiver system, antenna control and smart control and management software etc;
One button operation to easilyand quickly deploy and finish auto position, stow and tracking satellite within 3mins;
No tools required during installation and one person can finish within 5 minutes;
Prime focusfeed design for high gain and low side lobe performance;
Optional aviation packagematerial available.

3. Technical specification of 1Meter Motorized Flyaway Antenna

RF CHARACTERISTICS
Diameter		1.0m
Operating frequency	Tx	13.75-14.5GHz
	Rx	10.95-12.75GHz
Gain	Tx	＞40.5dBi
	Rx	＞39.5 dBi
Pol. mode		Linear
Cross Pol. Isolation	Tx	＞30dB
	Rx	＞30dB
VSWR	Tx	1.25:1
	Rx
Power capacity		800W
Feed interface		WR75
Rx to Tx isolation		Rx＞40dB, Tx＞85dB
Sidelobe		First sidelobe＜-14dB
MECHANICAL CHARACTERISTICS
Antenna type		Ring-focus type
Material of main reflector		Carbon fiber
El range		10°- 90°
Az range		±220°
Pol. range		±95°
Weight		20KG
ENVIRONMENTAL CHARACTERISTICS
Operational wind speed		14m/s
Survival wind speed		18m/s
Operational temperature		-40℃ — +55℃
Protection class		IP65

4. Component introduction of 1Meter Motorized Flyaway Antenna

5. Assemble guidance of 1Meter Motorized Flyaway Antenna

Find a level ground site (flyaway antenna with no requirements for the foundation). Firstly, check the components according to the provided packing list. If there found no any lost or damage, then take out the components respectively to start assembling.

Deploy tripod and fasten belt

Turntable pedestal install

Put the pedestal on the tripod mount and press the buckle down.

Feed network install

Reflectors assemble

6. Package & shipping dimension of 1.0M Motorized Flyaway Antenna

In 2 aviation cases

Item	SIZE（MM）	DESCRIPTION	QTY	G.W(KG)	N.W(KG)
1	830530400	Antenna Reflector	1	23.4	19.9
2	640480270	Antenna controller and receiver	1	18.93	15.43
Total	0.35CBM		2	42.33KG	35.33KG
Packaged in 2 Aviation package Gross Weight: 42.33KG Net Weight: 35.33KG Total volume: 0.35CBM